Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Fresno, CA
Cabinet installation and refacing in Fresno typically runs $3,800 to $9,500 for refacing an average 10×10 kitchen and $7,000 to $22,000 for a full cabinet replacement with installation. Most projects take 3 to 10 working days depending on whether we’re building new boxes or rebuilding the faces on existing ones. If your cabinet boxes are square, solid, and well-built but the doors and drawer fronts look tired, refacing gets you a new kitchen look for roughly half the cost of replacement – and we’ll walk you through that math before you commit to anything. Call Elmstead Remodeling Fresno at (559) 540-8453 to talk through what your cabinets actually need.
We’re part of the Kitchen Remodeling in Fresno team at Elmstead, a Cedarwell company serving the Fresno area since 2005. The written price promise applies here as it does on every Elmstead project: you get a number on paper before any work starts, and that number does not grow after the crew arrives. Graham Stein leads our Fresno location, and every cabinet project runs through the same Cedarwell Care Promise standards we apply to full kitchen remodels – shoe covers at the door, drop cloths on the floors, quiet tools during family rest hours where possible, and pet-safe product choices where there’s a choice to make.
Here’s what families in Fresno should know before deciding between cabinet refacing and full kitchen remodeling.
Key Takeaways
- Refacing costs $3,800 to $9,500 for a typical Fresno kitchen – roughly 40% to 55% less than full replacement with comparable door styles.
- Full cabinet installation runs $7,000 to $22,000 depending on kitchen size, cabinet line (KraftMaid and Wellborn are our named partners), and whether layouts change.
- You get a written price before any work starts – no estimates that grow after the crew arrives.
- The 365-Day Done Right Promise applies – if something isn’t done right within a year of completion, we make it right.
- Refacing works when boxes are straight and solid – not when shelves sag or cabinet sides have water damage.
When You Need Cabinet Installation & Refacing
You’ll know it’s time to do something about your cabinets when you’re working around them instead of with them. Here are the situations we see most often in Fresno homes, from Tower District bungalows to newer builds in Clovis and Madera Ranchos:
- Doors are delaminating or warping from heat. Fresno summers run hot, and kitchens without good ventilation see cabinet doors expand, shrink, and peel at the corners. Refacing replaces the doors and drawer fronts while keeping the boxes – and you avoid paying for new cabinet bodies you don’t need.
- The layout works but the look doesn’t. If you like where your cabinets are but the honey-oak or dated white thermofoil finish makes the room feel twenty years old, refacing changes the face and keeps the function. We see this a lot in homes built between 1995 and 2010 where the original cabinets are structurally fine but aesthetically stuck.
- You’re selling and want curb appeal inside. Fresno buyers notice kitchens first. Refacing gives you updated cabinet fronts, new hardware placement, and soft-close hinges – the things buyers touch – without the cost of a full tear-out.
- Drawers stick, slide poorly, or fall off their tracks. This is a hardware problem more than a cabinet problem. New tracks, soft-close slides, and properly aligned drawer fronts fix it, and the work usually takes a day or two.
- You bought a home with odd-sized or poorly built cabinets. Some older Fresno homes have cabinets that don’t fit standard dimensions or that were built with particleboard sides that have swollen near the sink. If boxes are compromised, refacing may not pencil out – and we’ll tell you that honestly.
- You’re changing the kitchen’s footprint. If you’re rearranging the layout, adding an island, or bumping out a wall as part of a larger kitchen remodeling project, full cabinet installation from KraftMaid or Wellborn is usually the right call.
Our Cabinet Installation & Refacing Process
We keep the kitchen remodeling process predictable so your kitchen is back in service as soon as possible. Here’s how it goes:
- We look at your existing cabinets first. Graham or a senior Elmstead project lead visits your home, checks box condition, measures every run, and asks how the kitchen needs to work for your family. Kids doing homework at the island? Pet bowls kept under the sink? We want to know before we spec anything.
- You get a written price. No waiting for a number to arrive by email three days later, and no verbal ballpark that drifts. The written price includes materials, labor, hardware, finish, and cleanup – itemized for every line. You see it before you sign anything.
- We order named-brand materials. Cabinet refacing uses doors and drawer fronts from our partner lines, and full installations run KraftMaid or Wellborn cabinets with your choice of door profile, wood species, and finish. Fixtures and pulls come from the brands you’ll find at any Fresno showroom so you can check what you’re getting by name.
- We protect the house before we pick up a tool. Drop cloths go down on the floor path, shoe covers go on at the door, and our uniformed, background-checked technicians ask before moving anything – including that stack of school papers on the counter.
- We install or reface. For refacing, that’s new doors, drawer fronts, veneer or paint on the exposed cabinet sides, and hardware. For full installation, it’s new boxes, leveling, doors, drawer slides, and soft-close hinges. We use quiet tools where possible during nap and school hours, and we check in with you at the end of each day.
- We photograph the clean-up before we leave. You get a photo of the clean-up included on every Elmstead job. It’s the same standard we use on home remodeling projects across the Cedarwell network: leave the house better than we found it, and show you proof.
Your completed cabinet project carries the 365-Day Done Right Promise. If something isn’t done right – a hinge that loosens, a door that shifts – we make it right. That’s written into the same project paperwork as the price.
How Much Does Cabinet Installation & Refacing Cost in Fresno?
Cabinets & countertops refacing in Fresno typically costs $3,800 to $9,500 for a standard 10×10 kitchen with painted or veneer doors, new drawer fronts, hardware, and soft-close hinges. Full cabinet installation runs $7,000 to $22,000 depending on kitchen size, cabinet line, and layout changes. Here’s how that breaks down:
- Refacing, basic – $3,800 to $6,000. Thermofoil or painted doors, standard hinges, limited hardware.
- Refacing, upgraded – $6,000 to $9,500. Solid wood doors from our cabinet partners, soft-close hinges throughout, new drawer tracks, upgraded pulls, finished cabinet side panels.
- Full installation, stock cabinets – $7,000 to $14,000. KraftMaid stock line, standard layout, soft-close hardware.
- Full installation, semi-custom or custom – $14,000 to $22,000+. Wellborn or KraftMaid semi-custom, layout changes, islands, taller uppers, custom finishes.
What moves the number: which cabinet line you choose, whether your kitchen has a corner setup or an island, whether we’re painting or using wood veneer on refacing, and how far the hardware needs to travel. Homes in the Tower District with original 1940s cabinets often need more surface prep than a 2015 build in northeast Fresno where boxes are clean and square.
We give you a written price for your specific kitchen before any work starts. Estimates are free. Call (559) 540-8453 and we’ll schedule the visit.
FAQs – Cabinet Installation & Refacing
Is it cheaper to reface or replace cabinets in Fresno?
Refacing is almost always cheaper, running 40% to 55% less than replacing cabinets with similar door quality because you’re keeping the existing boxes. If your cabinet boxes are square and structurally sound, refacing is the better financial move. The exception is when boxes have water damage, sagging shelves, or particleboard sides that have swollen in Fresno’s summer humidity swings – then replacement is the honest recommendation. Call (559) 540-8453 and we’ll help you figure out which route makes sense for your cabinets specifically.
How long does cabinet refacing take?
Most Fresno cabinet refacing projects take 3 to 5 working days from start to finish. Full cabinet installation usually takes 5 to 10 working days depending on kitchen size and whether kitchen design & layout changes are involved. We keep the work area clean throughout, and quiet tools are used where possible during family rest hours.
Can you reface cabinets if the boxes have water damage?
Usually not. If the cabinet sides near the sink or dishwasher have swelled, delaminated, or started crumbling, new faces won’t fix the structural problem and the work won’t hold. In those cases we recommend replacing at least the affected sections. We’ll tell you what we’d do in our own home – and the written price will reflect exactly what’s needed, nothing padded.
Do you install soft-close hinges as part of the project?
Yes, soft-close hinges are included on every refacing and full installation job we do. In homes with children, that’s not a luxury – it’s the difference between a slammed cabinet and a quiet kitchen. We use Blum-style soft-close hardware from our cabinet partners, and it’s covered under the 365-Day Done Right Promise along with the rest of the installation.
Can you come today?
We answer the phone with a live person 24/7, and we’ll get you on the schedule as quickly as possible. Call (559) 540-8453 and we’ll set up a visit to measure and price your cabinet project – estimates are free and the written price comes before any work starts.
Why Fresno Families Choose Elmstead for Cabinets
We’re not the cheapest cabinet contractor in Fresno, and we won’t try to be. What we are is the one that gives you a written price before any work starts, shows up with a uniformed background-checked crew, lays drop cloths on your floors and shoe covers at the door, uses quiet tools during nap and school hours, and photographs the clean-up before we leave. The same standards we bring to full Kitchen Remodeling in Fresno apply to cabinet work – and the same 365-Day Done Right Promise follows every project.
Our cabinet partners include KraftMaid and Wellborn, brands you can research by name and whose warranties travel with the finished project. Countertop work, when it’s part of your cabinet scope, ties to Cambria, Silestone, and Caesarstone. Fixtures come from Kohler, Moen, and Grohe. You’ll see the names on your written price, not a vague “premium materials” line item.
And because we’re parents ourselves, we think about the details families care about: no sharp-edged hardware near the toddler’s reach zone, pet-safe finishes where there’s a choice, and a crew that asks before moving the homework pile off the counter. The C.A.R.E. values do the work here – Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. That’s the Cedarwell Care Promise, and it’s stamped on every Elmstead project.
Get Your Written Cabinet Quote
If your kitchen cabinets are holding you back – or holding up a sale – we’d like to help. Call Elmstead Remodeling Fresno at (559) 540-8453 for a free estimate and a written price before any work starts. A live person answers, day or night, and we’ll set up a time to walk your kitchen together.
Written by Graham Stein, Owner at Elmstead Remodeling Fresno, serving Fresno.
