Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Fresno?
Cabinet installation in Fresno typically costs between $4,000 and $13,000 for a standard kitchen, with most homeowners in neighborhoods like Woodward Park, Tower District, and Sunnyside landing around $7,500 for a mid-range project with stock or semi-custom cabinets. The final price depends on cabinet quality, kitchen size, and whether you’re doing a simple swap or a full layout change. Our written price comes before any work starts, so the number you approve is the number you pay.
If you’re replacing cabinets in a smaller kitchen or a laundry room, you may fall closer to the $4,000 end. A larger kitchen with custom cabinetry, soft-close hardware, and new crown molding can push toward $13,000 or beyond once you add installation labor, demo, and finish work. The table below gives you the full line-item picture.
Cabinet Installation Cost Breakdown (2026)
| Line Item | Typical Range (Fresno, CA) |
|---|---|
| Stock cabinets (10×10 kitchen) | $2,000 – $4,500 |
| Semi-custom cabinets (10×10 kitchen) | $4,500 – $8,000 |
| Custom cabinets (10×10 kitchen) | $8,000 – $15,000+ |
| Installation labor (per linear foot) | $50 – $150 |
| Demo and disposal of old cabinets | $400 – $900 |
| Hardware (pulls, knobs, soft-close hinges) | $200 – $800 |
| Crown molding and trim | $300 – $1,200 |
| Painting or staining | $500 – $1,800 |
These numbers reflect what we regularly see across Fresno County, from Clovis to Fig Garden to the newer builds north of Herndon. Stock cabinets from a brand like KraftMaid give you a clean, durable look at the lower end of that range. Semi-custom from Wellborn lets you adjust depths and finishes without paying full custom prices, which is why so many Fresno families land in the middle.
What Drives the Price Up or Down
The single biggest factor is cabinet grade. Stock boxes are pre-built in standard sizes, so the price stays predictable but your layout has to work around those dimensions. Semi-custom keeps standard construction but opens up sizing and finish options, which matters a lot in older Fresno homes where walls are rarely perfectly square. Custom cabinets are built to your exact measurements, which is the right call for a kitchen with angled corners or a family that wants a specific wood species like alder or white oak.
After cabinet grade, installation complexity is the next driver. Moving plumbing or electrical, repairing drywall behind old cabinets, or leveling a floor that has settled in the Central Valley clay all add labor hours. Those are the costs an honest written estimate accounts for up front, not the kind of surprise that shows up after the crew has already filled the dumpster.
What Affects Cabinet Installation Pricing in Fresno
- Cabinet quality and brand. KraftMaid and Wellborn both have named warranties that travel with the finished project. Stock keeps the price low; semi-custom and custom move it up, but you know exactly which product line you’re paying for before the first screw goes in.
- Kitchen size and layout. A galley kitchen in a Tower District bungalow runs fewer linear feet than an open-concept kitchen in a northeast Fresno build. More cabinets mean more material and more install hours, and an island adds its own line item.
- Age of the home. Fresno homes built before 1980 often have unlevel floors and non-standard wall spacing. Getting cabinet doors to align cleanly on those walls takes shimming, scribing, and patience from a trained installer, which shows up in labor.
- Material of the boxes and faces. Plywood boxes cost more than particleboard but hold up better in Fresno’s dry summers, where particleboard can degrade faster. Solid wood faces, like maple or cherry, also move the number up.
- Finish work. Crown molding, light rail, filler panels, toe kicks, and matched end panels all add cost. A simple run of cabinets is straightforward; a kitchen that looks built-in requires the finish work that makes it look that way.
- Disposal and prep. Removing old cabinets, patching drywall, and hauling debris to a Fresno transfer station all have real costs. Some jobs need one trip to the dump; some need two.
All of these factors are reviewed before a written price is given. We do not hand a number over and then adjust it after the crew arrives. The price you see is the price you approve, and the 365-Day Done Right Promise stays attached to the project after the final walkthrough.
How to Save on Cabinet Installation
There are a few ways to keep a cabinet project in Fresno within a comfortable budget without cutting corners that matter.
- Keep the layout. The biggest savings is usually leaving the sink, range, and refrigerator exactly where they are. Moving plumbing and gas lines adds labor hours fast. If the current layout works for how your family cooks, keeping it is the single most effective way to lower cost.
- Choose stock or semi-custom over full custom. A semi-custom line from Wellborn gives you finish and sizing options at a price point far below true custom. Most kitchens we install in Fresno are semi-custom for exactly that reason.
- Reface rather than replace. If the cabinet boxes are still square and solid, new doors, drawer fronts, and hardware can deliver a visible change for less than a full replacement. We’re happy to walk through whether refacing actually makes sense for your cabinets or if replacing is the better long-term call.
- Schedule during a quieter season. Remodeling demand in Fresno tends to slow in late fall and early winter. If your timeline allows some flexibility, the same project may cost less during those months.
- Buy once on hardware. Cheap pulls and hinges fail, loosen, and need replacing within a few years. Soft-close hardware from brands like Moen costs a bit more up front and spares you a second service call later.
If you’re weighing options for your specific kitchen, call (559) 540-8453. Estimates are free, and the number we give you is the number on the contract. No pressure, no pricing games.
FAQs – Cabinet Installation Cost
How much does it cost to install cabinets in a small kitchen in Fresno?
A small kitchen cabinet installation in Fresno, typically 10 to 14 linear feet of uppers and lowers, costs between $4,000 and $9,000 for stock or semi-custom cabinets with basic hardware. A galley kitchen in an older Tower District home may land near $4,500, while a small kitchen in a newer Clovis build with plywood boxes and soft-close hardware can run closer to $8,000. Call (559) 540-8453 for an exact quote; estimates are free.
Is it cheaper to reface or replace kitchen cabinets?
Refacing typically costs $3,000 to $8,500 in Fresno, while replacement runs $4,000 to $13,000. Refacing saves money if the boxes are square, dry, and solid; replacement is the better long-term investment when the boxes have water damage, sagging shelves, or particleboard that has begun to swell from years of Central Valley heat. We’ll assess your cabinets honestly and tell you which path makes sense.
How long does cabinet installation take?
Most cabinet installations in Fresno take 2 to 5 days for a standard kitchen, not counting any custom cabinet lead time, which usually runs 4 to 8 weeks from order. Custom pieces from Wellborn can add 6 to 10 weeks before install day. During those install days, our crew uses quiet tools during the hours your family has asked us to protect, and we photograph the clean-up before we leave.
Do cabinet installation estimates include materials and labor?
Yes. Our written price covers the cabinets themselves, all hardware, installation labor, demo, and disposal as one number. You will not receive a material price and then a separate labor surprise after the fact. The figure you approve is the figure on the contract.
Can you install cabinets the same week I call?
That depends on the cabinet line. Stock cabinets from KraftMaid are usually available for install within 1 to 3 weeks. Semi-custom and custom orders from Wellborn take longer due to manufacturing lead time, often 4 to 8 weeks. Call (559) 540-8453 and a live person will tell you current availability for your choices, not a voicemail that gets returned later.
Fresno Cabinet Installation, Done Like It’s Our Own Home
Cabinet installation is the kind of project where the final product matters, but so does everything between the first measure and the last sweep. We bring drop cloths and shoe covers from the first visit, and they stay in place until the clean-up photo is taken. Graham Stein leads the Elmstead Remodeling Fresno team, and the Cedarwell Care Promise governs every job: clean up like it’s our own home, ask before we move or touch anything, respect your family’s time and quiet hours, and explain the price before the work. If you have kids or pets, we pick products and schedule around them where we can, because the house being left right matters as much as the cabinets looking right.
Named products from KraftMaid, Wellborn, Kohler, Moen, and Cambria are available for every project, and their manufacturer warranties stay with the finished work. The Cabinet Installation in Fresno page has more on how we approach these jobs from first call to final walkthrough, and our home page covers the full Cedarwell Care Promise. If you’re ready for a written price, call (559) 540-8453 and talk to a live person, 24/7.
Written by Graham Stein, Owner at Elmstead Remodeling Fresno, serving Fresno since 2005.
Pricing reflects the Fresno market as of 2026. Elmstead Remodeling Fresno offers free estimates – call (559) 540-8453.
What Our Customers Say
"Two bathrooms at once with a dog in the house. Dust contained, gentle with the pets, place left clean each day. Calm and careful crew."
- Lourdes Medina"Redid our main bath. They protected the hallway and carpet the whole way to the bathroom and vacuumed daily. Quiet during the baby's naps when they could be. Lovely finish."
- Harold Nussbaum"Kitchen remodel with two kids home. They walled it off in plastic and cleaned every day. Calm, respectful crew and the result is gorgeous."
- Priya Venkataraman
