Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Fresno Owner’s Guide
Boral fence installation in Fresno typically runs $3,500 to $9,000 for a complete project, and a single-section repair or gate rebuild usually lands between $400 and $1,800 depending on the section size and post condition. We stock common Boral-compatible fence hardware and can match most existing Boral panel profiles on the first visit. Most Fresno homeowners call us after a windstorm or a sprinkler adjustment gone wrong, and the conversation starts the same way: a leaning post, a cracked rail, or a gate that suddenly drags against the concrete.
Which Boral Models This Applies To
Boral fencing in California is most often seen as either the Boral timber-look composite system or the Boral masonry-and-composite hybrid used in newer Fresno subdivisions north of Herndon and out toward Clovis. The timber-look panels are usually identifiable by a molded wood-grain face and a hollow-core cross-section with steel reinforcement channels, while the masonry version runs on steel posts set into concrete footings with composite infill panels between them. If you can find the manufacturer’s label on the inside face of a panel or the underside of a top rail, that will tell us the series and color code, which matters because Boral’s weathered gray and its coastal brown do not blend with generic replacements.
We are an independent Fresno contractor, not a Boral affiliate, and that shapes how we recommend parts. When the original Boral panel is still available from a West Coast supplier, we price it as an OEM replacement. When it is discontinued or backordered eight weeks, we will show you an aftermarket composite panel that matches the rail reveal and the color close enough to pass from six feet away. The aftermarket conversation is honest: it is usually 20 to 30 percent less, but the color will drift slightly over the first two Fresno summers. We write both numbers down before anything comes off the truck, so the decision is yours with real figures, not a phone estimate.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- The post leans but the panel has not cracked yet. This almost always traces back to the concrete footing, not the post itself. In Fresno’s clay-heavy soil, winter rains swell the ground and summer heat shrinks it, and a footing poured too shallow will work loose over three to five years. The panel looks fine, but the post is walking.
- The gate scrapes the ground on the latch side. Boral gates are heavier than wood gates, and the hinge posts take more load than most installations accounted for. When the hinge post starts to lean, the gate drops at the latch corner. You will see the scuff mark on the concrete first.
- A top rail has separated from the post bracket. The steel bracket inside the Boral rail can corrode in Fresno if the rail cap was never sealed or if a sprinkler head has been misting the same joint every morning for years. The rail itself is usually still good; the connector is the failure.
- Hairline cracks running vertically on a panel. This is the Boral panel shell showing its age in direct sun. Panels on a south-facing run in Fresno see 100-degree-plus surface temperatures for weeks at a time, and the composite skin will eventually micro-crack before the structural core gives way.
- The whole fence line has shifted out of level by an inch or more. This is a soil problem, not a panel problem. A fence line set without accounting for Fresno’s expansive clay will move as a unit, and the fix is resetting posts on deeper footings or adding a gravel drain layer, not just swapping panels.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A complete Boral fence installation in Fresno runs $3,500 to $9,000, and that includes demo of the old fence, new post footings, panels and rails, hardware, and haul-away of everything we remove. A single-section repair, like one cracked panel and a reset post, usually runs $400 to $1,800. What drives the range: how many posts need new concrete footings, whether the old footings were poured with rebar cages or just dumped in, the panel series we are matching, and whether the run is straight or has to turn around a pool equipment pad or a mature tree.
The written price you get before work starts is the price. It includes the line-item cost of every panel, post, bracket, and bag of concrete, plus the labor to set it correctly. It includes shoe covers and drop cloths inside the house if the crew needs to pass through, and a photo of the clean-up before we leave. Every fence installation we do in Fresno carries the 365-Day Done Right Promise: if a post settles, a gate drifts, or a rail loosens within the year, we come back and make it right.
DIY or Call Us?
There are things you can check safely before you call anyone. Confirm which side of the post is leaning with a level. Look at the footing for cracks. Check whether the gate hinge screws have backed out of the post. Those observations help us quote accurately over the phone at (559) 540-8453, and they do not require touching anything under tension.
What we do not recommend is a homeowner attempting to pull and reset a Boral post themselves. The posts carry fence panel weight, and in Fresno’s clay soil, a post that has been moving for a season may be under lateral load from the whole fence line. When a post lets go, it lets go fast, and a person standing in the wrong spot gets hurt. Some things are worth the labor line item. Call us at (559) 540-8453 for a free estimate, and we will send someone out to look at the whole run, not just the section that is failing today.
FAQs
A correctly installed Boral fence in Fresno typically lasts 20 to 25 years on the panels and rails, with post footings needing reset or reinforcement once or twice in that span depending on soil movement and drainage. The hot, dry summers are hard on the composite surface, but the bigger threat in Fresno is the clay soil’s wet-dry cycle under the posts. Call (559) 540-8453 and we will walk the line with you and tell you honestly what has another decade in it and what does not.
A hairline surface crack can sometimes be stabilized with a color-matched composite repair compound, but a structural crack through the panel core should be replaced because the steel reinforcement channel loses its grip once the shell around it has split. We will always look for the repair path first, because a good repair is cheaper than a replacement panel and often looks better than a color mismatch. Call (559) 540-8453 for a free estimate and we will tell you which one your panel needs.
A single-post reset and panel replacement is usually a one-day job for our crew, while a full Boral fence installation on an average Fresno lot takes two to four days including demo, footings, cure time, and panel installation. We schedule around your family’s quiet hours where possible and use quiet tools during nap and school times when we can. Call (559) 540-8453 and we will give you a written timeline before we start, and we update it if anything changes.
We stock common Boral-compatible post brackets, hinge hardware, rail connectors, and color-matched screw kits on the truck, and many panel profiles can be sourced from our West Coast supplier within a week. Some discontinued Boral colors take longer, and we will be upfront about that timeline and show you the closest matching aftermarket option in the meantime. Call (559) 540-8453 and tell us what series and color you have, and we will check availability while you are on the phone.
Written by Graham Stein, Owner, Elmstead Remodeling Fresno at Elmstead Remodeling Fresno, serving Fresno and nearby areas.
