Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Driveway & Pavers: The Fresno Owner’s Guide
Techo-Bloc driveway pavers in Fresno typically cost $7,000 to $18,000 installed, depending on square footage, existing base condition, and the specific Techo-Bloc series you choose. We stock the most common Techo-Bloc lines and can usually have your replacement pavers on site within a week. The way most Fresno homeowners realize they have a paver problem is subtle at first: a low corner after rain, a wobble when you step in a certain spot, or water pooling in a place it never pooled before.
I’m Graham Stein, owner of Elmstead Remodeling Fresno. What we see most often in Fresno is not paver failure itself but base failure: the decomposed granite and sand under the pavers has washed out from years of irrigation overspray or heavy clay soil movement. The paver itself is usually fine. That matters because it changes the repair, and it changes the price.
Which Techo-Bloc Models This Applies To
Techo-Bloc makes several distinct paver lines, and they are not interchangeable. The big three for driveways in Fresno are the Blu 60, the Villagio, and the Aberdeen. Blu 60 is a modular system with three stone sizes that lock into a repeating pattern. Villagio is a rectangular stone with a tumbled, worn edge that reads more like old European stone. Aberdeen is a larger-format paver, and it has a different joint width and laying pattern than the others.
Here’s the compatibility gotcha: each Techo-Bloc series has its own thickness and its own jointing tolerance. A Blu 60 paver is 60mm thick; an Aberdeen is 70mm on the recommended range for driveways. You cannot swap one for the other mid-driveway without creating a height difference you will feel every time you pull in. If you’re not sure which series you have, look at the side of a pulled paver. Techo-Bloc stamps the series name on most lines. You can also measure the paver thickness and width. For OEM work, we order directly from Techo-Bloc distribution. For older or discontinued colors, a quality aftermarket match from a Fresno masonry supplier is sometimes the only option, and we’ll tell you honestly if the color will not match perfectly.
Styles & brands we work with
Signs Your Techo-Bloc Driveway & Pavers Is Failing
- Water pooling in a new spot after rain. The base has settled or washed out underneath. Pavers are only as level as what’s under them, and Fresno’s clay soil expands and contracts enough to shift a base over two or three wet winters.
- A paver that wobbles or rocks when you step on it. The sand bed under that paver has thinned, or the edge restraint has failed and allowed movement. One wobbly paver almost always means the neighbors are about to follow.
- A visible dip or low area near the driveway edge or a catch basin. Water flows to the low point and accelerates the base washout. This is the most common failure we see in north Fresno neighborhoods with older irrigation systems.
- Joint sand washing out after rain, leaving gaps between pavers. That sand is doing structural work: it locks the pavers against each other. When it’s gone, the pavers start to shift independently.
- Cracks in the paver surface itself. Weight stress from a vehicle, a dropped tool, or freeze-thaw cycling. Fresno’s dry heat rarely frosts, but a crack that lets water underneath will erode the base over time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Techo-Bloc driveway replacement in Fresno, the installed range is $7,000 to $18,000. That covers removal of the old pavers or surface, base excavation and compaction, new base material, sand bedding, the Techo-Bloc pavers, joint sand, and edge restraint. On the lower end, you’re looking at a smaller driveway with good existing base material we can reuse after recompaction. On the higher end, it’s a larger driveway, poor base, and a premium Techo-Bloc series like Villagio or Aberdeen.
Partial repairs, meaning a section of failed pavers reset on fresh base, usually run $1,500 to $4,000 in Fresno depending on how far the base damage extends. Before anything comes off the truck, you get a written price from us. Not an estimate that grows after the crew arrives. A written price. The 365-Day Done Right Promise applies to paver work the same as any other project we complete: if it’s not done right, we make it right.
DIY or Call Us?
Here’s my honest split. You can check a few things yourself: whether there’s water pooling, whether a paver rocks, whether the joint sand is gone. That tells you what’s wrong. What you should not do is pull up pavers without understanding the base underneath. The moment you disturb the sand bed and the base, you have committed to a repair that needs a compactor, leveling equipment, and several hours of labor to do right. A bad DIY paver repair looks fine for six months and then sinks, and now you’re paying to fix the fix.
That’s not a scare tactic. It’s what we see when we get called after a weekend project goes sideways. If you want to know what you’re actually dealing with, call us at (559) 540-8453. We’ll look at it, tell you the truth, and give you a written price.
FAQs
Techo-Bloc pavers themselves typically last 25 to 30 years in the Fresno climate. The base underneath them is what fails much sooner, often within 10 to 15 years if it was not compacted properly or if water has been allowed to wash through the joints. Call (559) 540-8453 to have your base and drainage evaluated before you decide on any paver work.
Yes, if the base failure is localized. A section of pavers can be lifted, the base recompacted, and the pavers reset on fresh sand. If the base failure runs across most of the driveway, replacement is the more honest fix, and we’ll walk you through why in plain terms. Call (559) 540-8453 for a free estimate and we’ll show you exactly what you’re dealing with.
A typical Fresno paver driveway replacement takes 4 to 7 working days from demo to final compaction and joint sand. That accounts for the clay soil compaction time, which you cannot rush. We’ll give you a schedule before we start, and Graham keeps a project calendar that actually gets updated when something changes.
We stock the most common Techo-Bloc series used in Fresno driveways, including Blu 60 and Villagio. If you need a less common color or a discontinued line, we order directly from Techo-Bloc distribution and can usually have it within a week. Call (559) 540-8453 and a live person will answer, day or night.
Written by Graham Stein, Owner, Elmstead Remodeling Fresno at Elmstead Remodeling Fresno, serving Fresno and nearby areas.
